Configuring BOSH Director with NSX-T for Tanzu Kubernetes Grid Integrated Edition
Page last updated:
This topic describes how to configure BOSH Director for vSphere with NSX-T integration for VMware Tanzu Kubernetes Grid Integrated Edition.
Before you begin this procedure, ensure that you have successfully completed all preceding steps for installing Tanzu Kubernetes Grid Integrated Edition on vSphere with NSX-T, including:
- Preparing to Install Tanzu Kubernetes Grid Integrated Edition on vSphere with NSX-T Data Center
- Hardware Requirements for Tanzu Kubernetes Grid Integrated Edition on vSphere with NSX-T
Depending on your NSX-T version:
- NSX-T v3.0: Installing and Configuring NSX-T Data Center v3.0 for Tanzu Kubernetes Grid Integrated Edition
- NSX-T v2.5: See the v1.7 documentation:
- Deploying Ops Manager with NSX-T for Tanzu Kubernetes Grid Integrated Edition
- Deploying Ops Manager with NSX-T for Tanzu Kubernetes Grid Integrated Edition
- Generate and Register the NSX-T Management SSL Certificate and Private Key in Installing and Configuring NSX-T Data Center v3.0 for TKGI
To create, delete, and modify NSX-T networking resources, Ops Manager tiles and APIs use a VMware NSX Manager account with the Enterprise Administrator role and permissions.
Users configure Ops Manager to authenticate to NSX Manager for different purposes in different tiles:
- Tanzu Kubernetes Grid Integrated Edition tile
The Tanzu Kubernetes Grid Integrated Edition tile uses NSX Manager to create load balancers, providing a Kubernetes service described in the Create an External Load Balancer section of the Kubernetes documentation.
To configure the Tanzu Kubernetes Grid Integrated Edition tile’s authentication to NSX Manager, see the topic Generating and Registering the NSX Manager Superuser Principal Identity Certificate and Key.
- BOSH Director for vSphere tile
The BOSH Director for vSphere tile uses NSX Manager to configure networking and security for external-facing Ops Manager component VMs, such as VMware Tanzu Application Service for VMs routers.
To configure the BOSH Director for vSphere tile’s authentication to NSX Manager, see Configure vCenter for Tanzu Kubernetes Grid Integrated Edition, below.
Log in to Ops Manager with the username and password credentials that you set up in Configure Ops Manager for Tanzu Kubernetes Grid Integrated Edition.
Click the BOSH Director for vSphere tile.
Select vCenter Config.
Enter the following information:
- Name: A name that you provide for your vCenter configuration. This field is used to identify the datacenter configuration in Ops Manager if you are configuring multiple datacenters.
- vCenter Host: The hostname of the vCenter that manages ESXi/vSphere.
- vCenter Username: A vCenter username with create and delete privileges for virtual machines (VMs) and folders.
- vCenter Password: The password for the vCenter user specified above.
- Datacenter Name: The name of the datacenter as it appears in vCenter.
- Virtual Disk Type: The Virtual Disk Type to provision for all VMs. For guidance on selecting a virtual disk type, see vSphere Virtual Disk Types.
- Ephemeral Datastore Names (comma delimited): The names of the datastores that store ephemeral VM disks deployed by Ops Manager.
- Persistent Datastore Names (comma delimited): The names of the datastores that store persistent VM disks deployed by Ops Manager.
Note: The vSphere datastore type must be Datastore. Tanzu Kubernetes Grid Integrated Edition does not support the use of vSphere Datastore Clusters with or without Storage DRS. For more information, see Datastores and Datastore Clusters in the vSphere documentation.
Select NSX Networking, then select NSX-T.
Configure NSX-T networking as follows:
- NSX Address: Enter the IP address of the NSX Manager host.
- NSX Username and NSX Password: Enter the NSX Manager username and password.
- NSX CA Cert: Provide the CA certificate in PEM format that authenticates to the NSX server. Open the NSX CA Cert that you generated and copy/paste its content to this field.
Configure the following folder names:
- VM Folder: The vSphere datacenter folder where Ops Manager places VMs.
- Template Folder: The vSphere datacenter folder where Ops Manager places VMs.
- Disk path Folder: The vSphere datastore folder where Ops Manager creates attached disk images. You must not nest this folder.
Note: After your initial deployment, you cannot edit the VM Folder, Template Folder, and Disk path Folder names.
Select Director Config.
In the NTP Servers (comma delimited) field, enter your NTP server addresses.
Note: The NTP server configuration only updates after VM recreation. Ensure that you select the Recreate VMs deployed by the BOSH Director checkbox if you modify the value of this field.
Leave the JMX Provider IP Address field blank.
Leave the Bosh HM Forwarder IP Address field blank.
Select the Enable VM Resurrector Plugin to enable BOSH Resurrector functionality.
Select Enable Post Deploy Scripts to run a post-deploy script after deployment. This script allows the job to execute additional commands against a deployment.
Note: You must enable post-deploy scripts to install Tanzu Kubernetes Grid Integrated Edition.
Select Recreate VMs deployed by the BOSH Director to force BOSH to recreate all BOSH-managed VMs on the next deploy. This process does not destroy any persistent disk data.
For typical Tanzu Kubernetes Grid Integrated Edition deployments, the default settings for all other BOSH Director configuration parameters are suitable. Optionally you can apply additional configurations to BOSH Director. See Director Config Pane in Configuring BOSH Director on vSphere in the Ops Manager documentation for details.
Note: If you need to be able to remotely access the BOSH Director VM using the BOSH CLI, and you are deploying Tanzu Kubernetes Grid Integrated Edition with NSX-T in a NAT topology, you must provide the Director Hostname for BOSH at the time of installation. See Director Config Pane in Configuring BOSH Director on vSphere in the Ops Manager documentation for details.
On vSphere with NSX-T, operators define and create create Availability Zones (AZs) using vCenter clusters and resource pools. Plans defined in the TKGI tile then use these AZs to enable high availability for TKGI clusters.
The Tanzu Kubernetes Grid Integrated Edition control plane also runs in one of the AZs.
For more information on AZs in TKGI, see Availability Zones in Tanzu Kubernetes Grid Integrated Edition Architecture.
To create Availability Zones in the BOSH Director tile:
Select Create Availability Zones.
Use the following steps to create one or more Availability Zones for Tanzu Kubernetes Grid Integrated Edition to use:
- Click Add and create the Tanzu Kubernetes Grid Integrated Edition Management AZ.
- Enter a unique Name for the Availability Zone, such as
- Select the IaaS configuration (vSphere/vCenter).
- Enter the name of an existing vCenter Cluster to use as an Availability Zone, such as
- Enter the name of the Tanzu Kubernetes Grid Integrated Edition Management Resource Pool in the vCenter cluster that you specified above, such as
RP-MGMT-TKGI. The jobs running in this Availability Zone share the CPU and memory resources defined by the pool.
- Click Add Cluster and create at least one Tanzu Kubernetes Grid Integrated Edition Compute AZ.
- Specify the Cluster and the Resource Pool, such as
RP-TKGI-AZ. Alternatively, specify the Cluster and the Host Group. See Using vSphere Host Group for more information.
- (Optional) If you are using a host group with vSAN stretched clusters,
set the VM-Host Affinity Rule dropdown to
SHOULD. This setting maintains high availability by letting TKGI restart VMs in another host group if their AZ fails. TKGI ignores this setting if the vSAN cluster has no host group configured.
For more information, see Ability to Set the VM-Host Affinity Rule to “Should” for Clusters in vSphere in the Ops Manager v2.9 Release Notes.
- Add additional clusters as necessary. Click the trash icon to delete a cluster. The first cluster cannot be deleted.
Select Create Networks.
Select Enable ICMP checks to enable ICMP on your networks. Ops Manager uses ICMP checks to confirm that components within your network are reachable.
Click Add Network.
Create the following network:
NET-MGMT-TKGI: Network for Ops Manager, BOSH Director, and Tanzu Kubernetes Grid Integrated Edition components. This network maps to the NSX logical switch created for the Tanzu Kubernetes Grid Integrated Edition Management Network. See Create Management Plane in Installing and Configuring NSX-T Data Center v3.0 for TKGI.
Note: NSX-T automatically creates the service network to be used by the master and worker nodes (VMs) for Kubernetes clusters managed by Tanzu Kubernetes Grid Integrated Edition. You should not manually create this network.
Use the following values as a guide when you define the network in BOSH. Replace the IP addresses with ranges you defined for the Create Management Plane in Installing and Configuring NSX-T Data Center v3.0 for TKGI. Reserve any IP addresses from the subnet that are already in use, such as the IP for Ops Manager and subnet gateway.
Field Configuration Name
vSphere Network Name
Reserved IP Ranges
Select the AZ-MGMT Availability Zone to use with the
Note: Do not select the COMPUTE network at this point in the configuration. It will be configured at the end of the procedure.
Select Assign AZs and Networks.
Use the drop-down menu to select a Singleton Availability Zone. The Ops Manager Director installs in this Availability Zone. For Tanzu Kubernetes Grid Integrated Edition, this will be the
Use the drop-down menu to select a Network for BOSH Director. BOSH Director runs on the Tanzu Kubernetes Grid Integrated Edition Management Plane network. Select the
In Trusted Certificates, enter a custom certificate authority (CA) certificate to insert into your organization’s certificate trust chain. If using self-signed CAs for your components (NSX-T, vCenter), you need to add every CA of every component your deployment may contact. This feature allows all BOSH-deployed components in your deployment to trust a custom root certificate.
If you are using a private Docker registry, such as VMware Harbor, use this field to enter the certificate for the registry. See Integrating Harbor Registry with Tanzu Kubernetes Grid Integrated Edition for details.
Choose Generate passwords or Use default BOSH password. Use the Generate passwords option for increased security.
Click Save. To view your saved Director password, click the Credentials tab.
Select BOSH DNS Config.
(Optional) In Excluded Recursors, enter a list of prohibited recursor addresses.
(Optional) In Recursor Timeout, enter a time limit for contacting the connected recursors. This includes dialing, writing, and reading from the recursor. If any of these actions exceeds the time limit you set, the action fails.
Note: This time limit must include one of the Go parse duration time units. For example, entering
5ssets the timeout limit to five seconds. For more information about supported time units, see func ParseDuration in the Go Programming Language documentation.
(Optional) In Handlers, enter a list of custom domain handlers in JSON format.
(Optional) To send BOSH Director system logs to a remote server, select Yes.
In the Address field, enter the IP address or DNS name for the remote server.
In the Port field, enter the port number that the remote server listens on.
In the Transport Protocol dropdown menu, select TCP or UDP. This selection determines which transport protocol is used to send the logs to the remote server.
(Optional) Select the Enable TLS checkbox to send encrypted logs to remote server with TLS. After you select the checkbox, perform the following steps:
- Enter either the name or SHA1 fingerprint of the remote peer in Permitted Peer.
- Enter the SSL certificate for the remote server in SSL Certificate.
Note: For an optimal security configuration, enable TLS encryption when you are forwarding logs. Logs can contain sensitive information, such as cloud provider credentials.
(Optional) Enter an integer in Queue Size. This value specifies the number of log messages held in the buffer. The default value is 100,000.
(Optional) Select the checkbox to Forward Debug Logs to an external source. This option is deselected by default. If you select it, you may generate a large amount of log data.
(Optional) Enter configuration details for rsyslog in the Custom rsyslog Configuration field. This field requires the rainerscript syntax.
Click Save Syslog Settings.
Select Resource Config.
Adjust any values as necessary for your deployment. Under the Instances, Persistent Disk Type, and VM Type fields, choose Automatic from the drop-down menu to allocate the recommended resources for the job. If the Persistent Disk Type field reads None, the job does not require persistent disk space.
Note: Ops Manager requires a Director VM with at least 8 GB memory.
Note: If you set a field to Automatic and the recommended resource allocation changes in a future version, Ops Manager automatically uses the updated recommended allocation.
Use the Ops Manager API to add custom properties to your VMs such as associated security groups and load balancers.
For more information, see Managing Custom VM Extensions.
Follow the steps below to deploy BOSH:
Go to the Ops Manager Installation Dashboard.
Click Review Pending Changes.
Click Apply Changes.
Confirm changes applied successfully.
Check BOSH VM. Log in to vCenter and check for the
p-boshVM deployment in the Tanzu Kubernetes Grid Integrated Edition Management resource pool.
Ater BOSH is successfully deployed, update the network you defined above (
NET-MGMT-TKGI) to include each of the COMPUTE AZs that you defined. This ensures that both the Management AZ and the Compute AZs appear in the Tanzu Kubernetes Grid Integrated Edition tile for the Plans.
Return to the BOSH tile and click Create Networks.
Edit the network (
NET-MGMT-TKGI) and each COMPUTE AZ.
Review pending changes, and click Apply Changes to redeploy BOSH.
Please send any feedback you have to email@example.com.