Using the Cisco Nexus 1000v Switch with Ops Manager
Page last updated:
Refer to the procedure in this topic to use Ops Manager with the Cisco Nexus 1000v Switch. First, configure Ops Manager through Step 4 in Configuring BOSH Director on vSphere. Then configure your network according to the following steps.
From your Ops Manager Ops Manager Installation Dashboard, click the BOSH Director tile.
Select Create Networks.
Click the network name to configure the network settings. This is default if you have not changed the name.
Find the folder name and port group name for the switch, as you configured them in vCenter. For the example vSphere environment pictured below, a user might want to use the switch configured on the
beer-appleport group, which is in the
Note: Folder names can be strings of multiple words separated by spaces, or strings of words separated by other punctuation, including dashes.
In the vSphere Network Name field, instead of entering your network name, enter the folder name and port group name for the switch, as you configured them in vCenter. For the example vSphere environment pictured above, you would enter
drinks dc/beer-appleto use the switch configured on the
Return to Configuring BOSH Director on vSphere to complete the Ops Manager installation.