LATEST VERSION: 1.10 - CHANGELOG
Pivotal Cloud Foundry v1.7

Using the Cisco Nexus 1000v Switch with Ops Manager

Page last updated:

Refer to the procedure in this topic to use Ops Manager with the Cisco Nexus 1000v Switch. First, configure Ops Manager through Step 4 in Configuring Ops Manager Director for VMware vSphere. Then configure your network according to the following steps.

  1. From your Pivotal Cloud Foundry (PCF) Ops Manager Installation Dashboard, click the Ops Manager Director tile.

  2. Select Create Networks.

  3. Click the network name to configure the network settings. This is default if you have not changed the name. Nexus switch config default

  4. Find the folder name and port group name for the switch, as you configured them in vCenter. For the example vSphere environment pictured below, a user might want to use the switch configured on the beer-apple port group, which is in the drinks-dc folder. Vsphere web client port groups

  5. In the vSphere Network Name field, instead of entering your network name, enter the folder name and port group name for the switch, as you configured them in vCenter. For the example vSphere environment pictured above, you would enter drinks-dc/beer-apple to use the switch configured on the beer-apple port group. Nexus switch config

  6. Click Save.

  7. Return to Configuring Ops Manager Director for VMware vSphere to complete the Ops Manager installation.

Create a pull request or raise an issue on the source for this page in GitHub