App Log Rate Limiting
Page last updated:
This topic describes app log rate limiting for apps in VMware Tanzu Application Service for VMs (TAS for VMs).
In TAS for VMs, you can limit the number of log lines each app instance can generate per second by configuring the App log rate limit (beta) section in the App Containers pane of the TAS for VMs tile.
App log rate limiting is disabled by default. Enabling this feature prevents app instances from overloading the Loggregator Agent with logs, so the Loggregator Agent does not drop logs for other app instances on the same Diego Cell. Enabling this feature also prevents apps from reporting inaccurate app metrics in the Cloud Foundry Command Line Interface (cf CLI) or increasing the CPU usage on the Diego Cell VM.
To configure app log rate limits, see Configure App Containers in Configuring TAS for VMs.
Note: In TAS for VMs, this rate limit is applied globally across all your apps. If only some of your apps require this setting, see App Containers in Installing Isolation Segment.
The ideal app logging rate for a deployment depends on characteristics such as VM sizes and
the number and type of apps in TAS for VMs. VMware recommends
using at minimum the default limit of
100 to avoid feedback latency.
When you enable app log rate limiting, Diego applies the rate limit to each app instance. For example, if there are five instances of an app running, Diego does not sum the logging rates of all five instances when determining if the rate limit has been exceeded. Instead, Diego evaluates the logging rate of each individual app instance and only limits instances that exceed the rate limit.
When an app instance exceeds the configured rate limit, Diego stores the app logs in a buffer and releases them into the logging stream at the per-second rate you configure through the App log rate limit (beta) section in the App Containers pane of the TAS for VMs tile.
For more information about how the buffer that Diego uses stores and releases app logs, see package rate in the Go documentation.
The Diego Cell containing the app instance emits the
counter metric when it exceeds the rate limit, similar to the following example:
origin:"rep" eventType:CounterEvent timestamp:1582582740243576212 deployment:"cf" job:"diego-cell" index:"0e98fd00-47b2-4589-94f0-385f78b3a04d" ip:"10.0.1.12" tags:<key:"instance_id" value:"0e98fd00-47b2-4589-94f0-385f78b3a04d" > tags:<key:"source_id" value:"rep" > counterEvent:<name:"AppInstanceExceededLogRateLimitCount" delta:1 total:206 >
Each Diego Cell in a deployment has a unique
total value of the counter is the sum total of all app instances on that Diego Cell that
have exceeded the rate limit since the creation of the Diego Cell. When there are no app instances
exceeding the rate limit, Diego Cells do not emit the
app-instanceB are running on one Diego Cell,
app-instanceD are running on a second Diego Cell, and the current
total for the
125 on the first Diego Cell and
43 on the second
Diego Cell. If
app-instanceD exceeds the rate limit, the second Diego Cell emits the
AppInstanceExceededLogRateLimitCount metric with a incremented
total value of
the first Diego Cell does not emit the
AppInstanceExceededLogRateLimitCount metric, and the
total value for the
AppInstanceExceededLogRateLimitCount metric on the first Diego Cell
A Diego Cell emits the
AppInstanceExceededLogRateLimitCount metric conditionally when an
app instance on that Diego Cell begins to exceed the rate limit. For example,
app-instanceD are on the same Diego Cell. If
app-instanceC exceeds the rate limit
continually over a ten-minute period, and
app-instanceD exceeds the rate limit during the
first three minutes of each five-minute interval within that ten-minute period and then stops,
the Diego Cell emits the
AppInstanceExceededLogRateLimitCount metric three times within that
If you are using a third-party log management service, you can configure an alert for when
the aggregated sum of the
AppInstanceExceededLogRateLimitCount metric across all the Diego
Cells on TAS for VMs has been incremented more than a certain number of times
or over a certain percentage in the last five or more minutes. When you configure this alert,
consider the number of app instances running on TAS for VMs, the logging rate
that you configured in TAS for VMs, your other TAS for VMs
configuration settings, and so on.
For more information about third-party log management services, see Streaming App Logs to Log Management Services.
Diego also logs when a noisy app instance exceeds the rate limit set in TAS for VMs. A log message similar to the example below appears in the log stream for the noisy app:
2020-02-24T12:42:18.90-0800 [APP/PROC/WEB/0] OUT app instance exceeded log rate limit (100 log-lines/sec) set by platform operator
To identify which app instances are exceeding the app log rate limit:
Note: The Firehose and Log Cache plugins were developed by the open-source Cloud Foundry community and are not supported by VMware.
Install the Firehose plugin by running:
cf install-plugin 'Firehose Plugin'
Install the Log Cache plugin by running:
cf install-plugin 'log-cache'
Filter your app log messages by running:
cf nozzle -f LogMessage | grep "app instance exceeded log rate limit"
The command returns all logs with log messages containing
"app instance exceeded log rate limit", similar to the following example:
origin:"rep" eventType:LogMessage timestamp:1583859621886751670 deployment:"warp-drive" job:"diego-cell" index:"3a574bde-91df-48b8-ae21-1d6913da0908" ip:"10.0.1.33" tags:<key:"app_id" value:"34bcfafc-402b-4bb4-84db-aea5401b79eb" > tags:<key:"app_name" value:"app-2" > tags:<key:"instance_id" value:"0" > tags:<key:"organization_id" value:"a30f39c2-4ff3-48a1-a869-a9ed21812a61" > tags:<key:"organization_name" value:"test" > tags:<key:"process_id" value:"34bcfafc-402b-4bb4-84db-aea5401b79eb" > tags:<key:"process_instance_id" value:"92e2ee78-3a1d-41a6-4933-e47b" > tags:<key:"process_type" value:"web" > tags:<key:"source_id" value:"34bcfafc-402b-4bb4-84db-aea5401b79eb" > tags:<key:"space_id" value:"0e2d2d58-3ef5-43f3-b880-c8a30903a96b" > tags:<key:"space_name" value:"test-2" > logMessage:<message:"app instance exceeded log rate limit (100 log-lines/sec) set by platform operator" message_type:OUT timestamp:1583859621886751670 app_id:"34bcfafc-402b-4bb4-84db-aea5401b79eb" source_type:"APP/PROC/WEB" source_instance:"0" >
You can inspect these logs to identify the app instances that are exceeding the app log rate limit.